Universal Audio Apollo 16 interface

I/O Complement - Analog Line Inputs  16 - Analog Line Outputs  16 - Analog Monitor Outputs  Two (one stereo pair) - AES/EBU  One stereo input, one stereo output - FireWire 800 (IEEE 1394b)  Dual ports -Thunderbolt (via Thunderbolt Option Card)  Dual ports - Word Clock  One input, one output - MADI Optical Ports  One input, one output A/D – D/A Conversion - Supported Sample Rates (kHz)  44.1, 48, 88.2, 96, 176.4, 192 - A/D Bits Per Sample  24 - Simultaneous A/D conversion  16 channels - Simultaneous D/A conversion  18 channels - Analog Round-Trip Latency  1.1 milliseconds @ 96 kHz sample rate - Analog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application  1.1 milliseconds @ 96 kHz sample rate - Analog I/O Analog Inputs 1 – 16 - Dynamic Range  119.25 dB (A–weighting) - Signal-to-Noise Ratio  119.25 dB (A–weighting) - Total Harmonic Distortion + Noise  -112 dB @ -1 dBFS - Common-Mode Rejection Ratio  -75 dB - Frequency Response  20 Hz – 20 kHz, ±0.05 dB - Channel Separation (Crosstalk)  -138 dB - Input Impedance  10 Kilohms - Gain Settings  +4 dBu or -10 dBV (reference level is selectable in pairs) - Max Input Voltage (Reference Level @ +4 dBu, Balanced)  20.22 dBu
(18 dBV, 7.94 VRMS, 0 dBFS) - Max Input Voltage (Reference Level @ -10 dBV, Balanced)  14.22 dBu
(12 dBV, 3.98 VRMS, 0 dBFS) - Max Input Voltage (Reference Level @ -10 dBV, Single-Ended)  8.22 dBu 
(6 dBV, 2 VRMS, 0 dBFS) - Stereo Level Balance  ±0.01 dB - Connector Type  Two Female DB25, Tascam wiring Analog Outputs 1 – 16 - Dynamic Range  118.5 dB (A–weighting) - Signal-to-Noise Ratio  118.2 dB (A–weighting) - Total Harmonic Distortion + Noise  -107.5 dB @ -1 dBFS - Connector Type  Two Female DB25, Tascam wiring Monitor Outputs 1 – 2 - Dynamic Range  115 dB (A–weighting) - Signal-to-Noise Ratio  115 dB (A–weighting) - Total Harmonic Distortion + Noise  -105.5 dB @ -1 dBFS - Gain Range (Monitor Knob)  -INF to 0 dBFS - Connector Type  Two Male Balanced XLR (pin 2 hot) All Analog Outputs - Frequency Response 20 Hz – 20 kHz, ±0.05 dB - Channel Separation (Crosstalk) -120 dB - Output Impedance 600 Ohms - Stereo Level Balance ±0.01 dB - Gain Settings +4 dBu or -10 dBV (reference level is selectable in pairs) - Max Output Voltage (Reference Level @ +4 dBu, Balanced) 20.22 dBu 
(18 dBV, 7.94 VRMS, 0 dBFS) - Max Output Voltage (Reference Level @ -10 dBV, Balanced) 14.22 dBu 
(12 dBV, 3.98 VRMS, 0 dBFS) - Max Output Voltage (Reference Level @ -10 dBV, Single-Ended) 8.22 dBu 
(6 dBV, 2 VRMS, 0 dBFS) Digital I/O AES/EBU Connector Type  XLR Format  IEC 60958 Type I MADI Connector Type  Dual Optical SC-Plug (ISO/IEC 9314-3) Format  AES10 Supported Modes @ Sample Rates of 88.2 kHz and Higher  Standard, Legacy Word Clock Connector Type  BNC Lock Range  ±0.5% of any supported sample rate Word Clock Input Termination  75 Ohms, switchable Synchronization Sources Internal, Word Clock, AES/EBU Electricity Power Supplies  External AC to DC Power Supply Brick (Internal DC to DC Power Supply)  AC Connector Type  IEC Male AC Requirements  100V – 240V AC, 50 – 60 Hz DC Connector Type  XLR 4-Pin Locking Male (Neutrik P/N NC4MDM3-H) DC Requirements  12 VDC, ±5% Maximum Power Consumption  40 Watts (55 Watts when bus powering external Thunderbolt peripheral) Dimensions - Width  19” - Height  1.75” (1U rack space) - Depth, Chassis Only  12.125” - Depth, Including Knob & Jack Protrusions  13.75” - Shipping Box (Width x Depth x Height)  24” x 17” x 8” Weight - Shipping Weight (with box & accessories)  18 pounds - Weight (bare unit)  8.7 pounds Package Contents - Apollo 16 Audio Interface - External Power Supply - Apollo 16 Hardware Manual - 15’ FireWire 800 cable - (2) IEC AC Power Cables (USA & Europe) - Set of (4) Rack-Mount Screws - Universal Audio Product Catalog