Audio Innovate Innofader 0,45 Ohm

Waardering:
100% of 100
2  beoordelingenBeoordeel dit product
Audio Innovate innofader 0,45 Ohm
Incl. BTW
Niet meer leverbaar
  • Grote voorraad, snelle levering
  • Fysieke showroom in Haarlem
  • Retourneren kan ook in de winkel
  • Bijna altijd direct een expert aan de lijn

Productinformatie Audio Innovate Innofader 0,45 Ohm

Audio Innovate gears up to introduce the long awaited Innofader as a quality replacement for VCA mixer faders. The key points of the InnoFader are as follows: No bleed/cracking Even the best conductive plastic (CP) or carbonized conductive plastic (CCP) contact faders will eventually bleed and require cleaning. Since the InnoFader is non-contact, no cleaning is required. Sturdy design - 8mm stem, long body type Many DJs have experienced issues with bent or broken 4mm fader stems, thus the InnoFader adopts the emerging standard 8mm stem, ensuring almost no chance of breaking the stem. The long body type ensure a rigid construction which when combined with the heavy stem ensures a solid and long lasting crossfader. A full steel body cage ensures that the fader will hold together for years of aggressive use without breaking. Precision output The InnoFader is factory calibrated for a precision cut-in equal on both sides of the fader. It also only responds to motion along the length of the fader so the sound will be clean even during aggressive use. Fits many VCA mixers without mods Gone are the days of soldering and cutting wires to fit your mixer. The Innofader comes with 9 different adapter sockets to fit many popular VCA mixers on the market. Ultra wide range tension adjustment At the lightest setting, the InnoFader can move with the slightest tap. On the other extreme, the InnoFader requires a steady push to move it. DJs can adjust the InnoFader to any tension setting depending on mixing style. Ultra smooth rails The Innofader uses high strength steel rails for a smooth feeling at any tension setting. Adjustable curve Analog VCA faders have fixed A, B, or D-type curves. The InnoFader has an output curve adjustment to fit any of these configurations. In addition to fitting these configurations, the InnoFader can be set for full cutting at the top or bottom. Single cut-in adjustment for both sides This ensures that the InnoFader can work in any sized fader slot. Since the adjustment is electronic, the actual active fader area can be shortened, unlike others which have a fixed active fader area. This often requires adjusting the mixer to fit the fader, while the InnoFader can be electronically adjusted to fit the mixer. Not affected by dust, smoke, temperature, moisture One main drawback of optical faders is that they stop working once there is internal dirt buildup. The InnoFader´s electronic signals are unaffected by environmental factors experienced in harsh DJ environments. No cleaning required Unlike other contact fader technologies, only routine light maintenance is required to keep the rails lubricated and free running. Because of the closed construction of the long body, this is kept to an absolute minimum. Reasonable cost The InnoFader comes in at a very reasonable price for the quality and performance it offers. The InnoFader will be available as a 3rd party replacement fader from retailers for the majority of popular DJ mixers that utilise a standard long body fitment. It is also planned to offer the InnoFader to interested manufacturers as a standard component or as an option. Both will be available in Q2 of 2008.
Audio Innovate innofader 0,45 Ohm

Heb jij de

Audio Innovate Innofader 0,45 Ohm


Elders goedkoper gezien?!


Laat het ons weten en we doen een voorstel

Reviews

100% of 100

Rating: 5 / 5 op basis van 2 beoordelingen.

Onder alle inzenders van een review verloten wij iedere maand een waardebon t.w.v. 25 euro! Schrijf een review