Doepfer A-101-8 Photo Phasing
Looking for a cool 8-stage phase shifter? Then the Doepfer A-101-8 is for you!
- Fast delivery
- Brick&mortar store in Haarlem
- Come in for a cup of coffee!
- Almost always directly an expert on the line
Product Information Doepfer A-101-8 Photo Phasing
The Doepfer A-101-8 is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual phasing circuit is identical to the historic model. Only the illumination control of the LDRs is different: the A-101-8 uses LEDs to illuminate the LDRs, the historic model used incandescent miniature lamps. And the A-101-8 has no built-in LFO but can be controlled by any external control voltage source (e.g. LFO, ADSR, random, Theremin, ribbon controller, sequencer, midi). The phasing offset (i.e. the base value for the phase shifting) and the modulation depth of the external control signal can be adjusted separately. The Compact Phasing A had no offset control but only a depth control for the built-in LFO. Feedback and mixing ratio of the output signal are set by two controls. The audio input is equipped with an attenuator. The module has two audio outputs available (same as the historic model) and a visual display of the phase shifting.
The module has these controls and in/outputs available:
- Control Man. : manual control of the phase shift offset (base value)
- Control CV: attenuator for the signal applied to the CV socket
- Control Feedb.: Feedback or Resonance (similar function as filter resonance/feedback/emphasis)
- Control Mix: sets the mixing ratio between original and phase shift signal appearing at output 1
- fully CCW: only the modified input signal appears at output 1 (see note below *)
- center: a mixture between the modified input signal and the phase shift signal appears at output 1, that's the standard position for the classical phasing effect
- fully CW: the pure phase shifted signal appears at output 1 (e.g. for vibrato effects)
- Control Input Level: attenuator for signal applied to the In socket
- Socket In: audio input
- Socket CV: control voltage input
- Socket Out 1: audio output 1 (mix signal)
- Socket Out 2: audio output 2 (modified input signal)
- LED: visual control of the phase shift
Heb jij de
Doepfer A-101-8 Photo Phasing
Elders goedkoper gezien?!
Laat het ons weten en we doen een voorstel